- Product Category
- Launch X431 Scanner (4)
- Professional Tool (62)
- Key Programmer (26)
- Mileage Correction (18)
- Code Reader and Scanner (17)
- Airbag Reset Tool (5)
- Auto Repair Software (3)
- ELM Tool (5)
- Auto Key and Chip (5)
- Chip Turning Tools (4)
- ECU Flasher Tool (5)
- Immoblizer Reader (5)
- Service Resetting (4)
+86-755-2927 0586
+86-755-8372 6389
obdiiscanner-service
info@obdiiscanner.com
obdiiscanner@hotmail.com
Obd II Scanner =>>Mileage Correctio =>VAG TACHO USB 2.5 + OPEL IMMO
VAG TACHO USB 2.5 + OPEL IMMO
 |
VAG TACHO USB 2.5 + OPEL IMMO |
 |
This cable is both for VAG and Opel, when it is connected to the VAG TACHO USB 2.5 software, it works as VAG TACHO USB cable, when it is connected to Opel Immo Pin code Reader, it works as Pin code reader.
VagTacho + Opel-Immo-AirBag Scanner upDate for OPEL IMMO-1 IMMO-2 and AIR-Bag Tool UpDate to Last version 2.50
Latest update: VW Polo ,Seat Ibiza Cordoba 2001 - 2005, Fabia 2004 ect.Single click access for VDO Seed-Key dashes!(This means: VW Passat B6, Bora/Jetta, Polo to 2004 year, Golf 4, Sharan to 2003 year,Skoda Octavia/Fabia to 2004 year , some Seat dashes up to 2004 year ect...)
For VAG
Bosch/Motometer dashes for VW 2001-2003 years V07.04, V07.05, V07.08, V07.13 (with scan for 2'nd pass) Audi A4,A6,A8 separate immo box 1994-1999 read PIN code,and read/write eeprom! Audi A3,A4,A6,TT, New Beetle Magnetti Marelli M73 (1998-2003 year) read PIN code / change mileage! New Beetle Magnetti Marelli M73 (2001 to 2005 year) read PIN code Almost all VDO dashes for VW/Seat/Skoda up to year 2004 read/write eeprom! Almost all VDO dashes for Audi up to year 2001 read/write eeprom! Almost all MotoMeter dashes for VW/Seat up to year 2001 read/write eeprom! Automatic functions: Change mileage, Read PIN code ! All this by using car OBD connector! Without disassembly dash or immo box from car! Commands for VAG: Select ECU from Menu File : User can save and read files to / from program memory buffer. Connect Any Tacho button Connect Selected ECU Read Info Read PIN Change Mileage Stop Action Read eeprom Program New Key Disconnect View memory buffer Write eeprom Clear ECU errors
For Opel
Immo1 & Immo2 supported up to year 2004 Manual for programming new keys. User can program up to 5 diferent keys to an immobiliser. How to do this: Insert new key, and switch ignition ON. Connect to immobilizer. Enter correct PIN code. Press "Prog New Key " Message 'Reading key...' will be displayed on screen. After successful procedure there will be a message: 'Key programmed!' Wait 10 seconds and turn ignition OFF. Turn ON ignition with same key, and wait until yellow indicator lamp on car dash stop flashing, and ligth on continiously. Start the car to test new keyIf the indicator lamp continue flashing, this means that transponder is notcompatible to this car or engine ECU, try to program other transponder from another type. If there are error message when try to program new key,user can read errors to see where is the problem.
VAG TACHO USB 2.5 + OPEL IMMO Package Contains
- VAG TACHO 2.5 interface
- Version 2.5 software CD
Any question or request about this VAG TACHO USB 2.5 + OPEL IMMO, please send us inquiry!
- Special Offer
- AUTOMAM T300
- Tacho Universal
- X-431 Diagun
- AD900 Pro
