We are auto diagnostic scanner factory and wholesaler for Launch X431,X431 Scanner,Autoboss V30,MB Star,GM Tech II, Honda GNA600,Renault Can Clip,BMW GT1,Tacho Universal,Digimaster,T300, SBB Key Programmer, AD900 Pro...
Obd II Scanner =>>Professional Tool =>Volvo Scanner
Volvo Scanner
 |
Product NO.: PRT0035 |
| Product Name:Volvo Scanner |
| Weight: 0.2 KG |
Unit Price: US $150.0 |
| Shipping: Calculated at checkout |
|
|
PC based code reader and live data scan tool for Volvo cars including 800
Series, C70, S40, V40, S70, V70, 900 series, S90 and V90
Features:
New Design! 232 Chipset based design
Works excellently volvo fault code reader 1.3 serial
version Serial port design, supports the most chanllenging time-critical
application like serial EEPROM programming
Supported Software:
OnBoardDiagnostics Versions: 1.3
Volvo FCR Communication Interfaces to connect a Volvo Vehicle to a PC
What can this interface be used for?
This interface (adapter) is used as an interface and an Serial cable
to connect a volvo vehicle to a PC for on-board diagnostics (OBD).
It is fully compatible with the diagnostic software version 1.3 from
Volvo FCR. Volvo FCR is a software program that turns your PC into
a sophisticated Volvo diagnostic tool.
Product Features and Benifits:
-Supports Volvo FCR version 1.3 or older
-Precision-molded diagnostic connector made to fit all volvo
vehicles, even those with "tight" trim around diagnostic socket
-LED light indicating communication status
-High quality UL certified Serial Cables (equivalent to CE)
-Built-in, Electronic Protection from the "Aftermarket Radio Problem"
What is Volvo FCR?
Volvo FCR is a Windows-based Diagnostic Software for Volvo that
emulates the functions of the dealers' very expensive proprietary
scan tools. As the first aftermarket Volvo-Tool,
it has the following features:
Volvo control module coverage includes:
-Engine - Petrol and Diesel
-ABS
-Automatic transmission
-SRS - airbag and other protection systems
-Driver and passenger seat memories
-Instruments, including service light reset
-Climate control - air conditioning
-Immobilizer
-Alarm
-Road traffic information
-Additional heater
How to Use?
-For laptops and PCs, download the shareware 1.3
-Run it and follow the prompts to allow it to install itself.
Note: You must install volvo FCR on your PC's hard disk -- it will not work
properly if you try running it directly from a floppy or CD. However, you
can use a floppy or CD to move the distribution file from a PC with
internet access to another PC that does not have internet access.
-Connect the interface between the computer and the car by plugging one
end of the interface into a Serial (RS232) (or USB port ) on your PC and
the other end directly into the OBD-II port present passenger vehicles.
-Turn the car's ignition switch ON. No need to start the engine.
-Start the Volvo program,
-Now it works. Make sure the software can reliably access all the control
modules that it should in your car.
What are the system and computer requirements?
-A PC running Windows: It is recommended to use at least a Pentium-100
(or AMD equivalent) with 16MB of RAM and Windows 95 or newer. Volvo
FCR may work on some lesser PC's, but anything less than the above
recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and XP
are all fine. Available disk-space is a total non-issue, Volvo FCR
requires less than 1 MB.
What are the system and computer requirements?
-A PC running Windows: It is recommended to use at least a Pentium-100
(or AMD equivalent) with 16MB of RAM and Windows 95 or newer. Volvo
FCR may work on some lesser PC's, but anything less than the above
recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and
XP are all fine. Available disk-space is a total non-issue, Volvo
FCR requires less than 1 MB.
Any question or request about this Volvo Scanner, please send us inquiry!
Related Products
+86-755-2927 0586
+86-755-8372 6389
obdiiscanner-service
info@obdiiscanner.com
obdiiscanner@hotmail.com
